ICOM A25C Comm-Only Transceiver

6 Watts High Radio Frequency (RF) Output Power
For expanded communication coverage, output power has been increased to approximately 6 Watts typical (PEP)/ 1.8 Watts typical (carrier) compared to most Aviation Transceivers at 5 watts.

2.3 inch Large High Visibility LCD
The 2.3 inch large, high-contrast and high visible LCD displays user-friendly, graphic screens and ensures good readability under direct sunlight. The operating frequency in large characters can be recognized at a glance. In addition, the night mode option enables easy viewing in low light conditions.

Easy-to-use Interface
Often-used functions are assigned to the 10 keypad and you can directly access a desired function. The enlarged flat sheet keypad offers smooth and swift operation.

“Flip-Flop” Channel Recall
The ICOM-A25C air band radio stores the last 10 channels used. You can easily recall those channels by using the directional keys, the channel knob and the 10 keypad. This is convenient for switching between several channels. In addition, you can freely edit (replace, delete, change order) the stored recall channels.

Intelligent Battery with Detailed Battery Status
The supplied BP-288 2350 mAh typical intelligent battery pack, provides up to 10.5 hours of operating time. You can check the condition of the battery pack in the battery status screen. This is very useful for optimum charging and battery health maintenance.

• IP57 dust-protection and waterproof construction (one meter depth for 30 minutes)
• BNC antenna
• 121.5 MHz emergency key
• Priority watch - Scans your "Priority" frequency first.
• VFO scan, memory channel scan, priority scan
• ANL (Auto Noise Limiter) for noise reduction
• Side tone function enables you to hear your own voice from an external aviation headset
• Internal VOX capability
• 300 memory channels (in 15 memory groups) with 12 character names

General:

• NAV and/or COM: COM channels only
• Frequency range:
• Tx: 118.000-136.975 MHz
• Rx: 118.000-136.975 MHz
• RX (Weather): 161.650-163.275 MHz
• Number of memory channels: 300 channels/15 groups
• Channel spacing: 8.33/25 kHz
• Type of emission: 6K00A3E, 5K60A3E, 16K0G3E (Weather)
• Power supply requirement: 7.2 V DC (BP-288), 11.0 V DC (External DC Jack)
• Current drain (approximately):
• Tx High: Less than 1.8 A
• Rx Max. audio/Stand-by: Less than 500 mA/90 mA typ.
• Antenna impedance: 50 Ω
• Operating temperature range: –10°C to +60°C; 14°F to 140°F
• Dimensions (W×H×D) (Projections not included): 2.3 × 5.8 × 1.3 in, 58.9 × 148.4 × 31.8 mm
• Weight (approximately): 12 oz, 340 g (with BP-288)
• Durable: Mil-STD-810-C, -D, -E, -F, -G

Transmitter:

• Output power (at 7.2 V DC): 6.0/1.8 W (PEP/carrier)
• Audio harmonic distortion: Less than 10% (at 60% modulation)
• Hum and noise ratio: More than 35 dB
• Spurious emissions: More than 46 dB
• Frequency stability: ±0.4 kHz

Receiver:

• Intermediate frequencies: 46.35 MHz/450 kHz (1st/2nd)
• Sensitivity:
• NAV/COM (6 dB S/N): Less than 0 dBμ
• WX (12 dB SINAD): Less than –8 dBμ
• Squelch sensitivity (at threshold): Less than 0 dBμ (AM), Less than –5 dBμ (FM)
• Audio output power: More than 350 mW typ. (8 Ω load/60% Mod. at 10% distortion)
• Hum and noise: More than 35 dB (at 30% modulation)
• Spurious response: More than 60 dB (AM), More than 30 dB (FM)
• Hum and noise: More than 40 dB (at 90% modulation)
• Audio output power: More than 350 mW typ. (8 Ω load/60% modulation at 10% distortion)
• Ext. speaker connector: 3-conductor 3.5 (d) mm (1⁄8ʺ)/8 Ω

Other:

• 3-Year U.S. Warranty
• Mil Spec: MIL 810G, Meets MIL-STD-810-C, D, E, F

• Icom A25C Transceiver
• FA-B02AR antenna
• BP-288 Li-ion Battery Pack
• MB-133 belt clip
• BC-224 rapid charging cradle
• BC-123SA 100-240 Volt AC adapter for U.S. Plugs
• OPC-2379 headset adapter
• Hand strap