Universal Flex Yoke Mount Kit for iPads and Tablets

The Universal Flex Yoke Mount Kit is the perfect mounting solutions for yoke shafts with a diameter up to 1.5". If there are support struts inside your cockpit, this mount is excellent for securing your iPad there as well. For pilots needing to mount to something with a larger diameter or looking to have a slightly more permanent mounting solution, please check out the Universal Flex Beech Yoke Mount Kit.

iPad Yoke Clamp Features:

• Secure the mounting arm over or under the yoke (depending on your specific requirements), position the iPad as you wish.
• Fits yoke shafts from 5/8" to a maximum of 1 1/2" (equivalent to 1.9" to 4.7" in circumference). Perfect for rails and support poles in cockpits and cabins. 
• How to tell how big your Yoke Post is? Simply take a string and wrap it around the post. Mark it with a marker. Then stretch it out on a ruler – that will be your Yoke circumference!
• Made out of a lightweight, high strength, composite material.

NOTE: This Mount will NOT work on most Beechcraft airplanes, or Piper Comanches - the Yoke Posts are too large.

The Sport Flex Yoke Mount construction:

• The arm is comprised of three independent joints, all adjustable and lockable from a single, centrally located, control knob
• The control knob joint is adjustable to 360° and the two end joints are mini-ball heads that are adjustable to 105°
• The Yoke Clamp has a quick release toggle clasp
• Length ranges from a compact position as close as 3.25” inches to as long as 10.5”
• Fits Yoke shafts from 5/8" to a maximum of 1 1/2" in diameter
• The control knob allows partial loosening for safe and precise device positioning
• No longer limited to fixed length, limited rotation RAM arms
• Takes all of the guess work out of mount size selection and problems of imprecise positioning

Universal Cradle:

• Designed to work with almost any tablet in virtually any case, or no case at all
• Arms of the cradle are adjustable via quick release knobs making it easy to insert and remove your tablet. 
• Compatible with most protective cases, larger and small: Leave your tablet in its protective case.
• Larger case compatibility includes:
  • OtterBox 
  • LifeProof

To position:

1. Position and lock the yoke clamp.
2. Tighten the control knob on the flex arms.
3. Attach the Universal Cradle to the Sport Adapter
4. Loosen the control knob and the yoke clamp, position the device
5. Tighten the yoke clamp
6. Fine tune device positioning, tighten control knob

NOTE: This Mount will NOT work on most Beechcraft airplanes, or Piper Comanches - the Yoke Posts are too large.

Tablets:

• Microsoft Surface o Samsung Galaxy Tab 10.1 & 7
• Apple iPad, iPad Air, iPad Pro 9.7", 10.5", 11", 10.2" & iPad mini
• Asus Transformer & MeMo
• Google Nexus

Cases:

• OtterBox 
• LifeProof 

• Arm Minimum extension – 3.25”, Maximum extension - 10.5"
• Arm Material: alloy
• Universal Cradle - alloy

• Yoke Clamp
• Sport Adapter
• Articulating adjustable arm
• Universal Cradle

Universal Cradle Interchangeable Clips:

• The Clips on the ends are angled so they grip your Tablet firmly
• Includes a set of Clips with 12 mm (.47 inches) depth for "naked" devices
• Includes a set of Clips with 24 mm (.95 inches) depth for "boxed" devices